Standalone

VUTLAN
VUTLAN is a controller for environmental monitoring and device control. It works with Analog sensors, CAN-bus devices and Dry Contact, and can collect data from other network devices via SNMP v1, v2c, v3 and Modbus TCP/IP. Modbus RTU (RS-485) is supported when an add-on module is installed.
Highlights of VUTLAN
Suited to projects that need to install and use right away with no software to install, and need to connect to other systems
Standalone, no software installation needed
After installation, configure via the unit's web interface. All features are built in.
Third-party system integration
Receives Dry Contact input signals from other devices, Modbus RTU (RS-485) via the VT485m or VT485m ISO module (sold separately), and collects data from other network devices via SNMP v1/v2c/v3 and Modbus TCP/IP
Ports full
Analog port, CAN bus, Dry Contact; expandable with VT408 (Analog) and VT440 (Dry Contact) modules
Built-in LTE
An LTE module can be installed directly in the unit's slot with no separate USB modem (module sold separately; insert a SIM)
Multi-channel alerts
Email, Telegram, LINE OA (limited to 300 messages/month) via the MT Notify service, and SMS when an LTE module is fitted
Management software used with VUTLAN
| Name | Format | What it does |
|---|---|---|
| MT Monitor (by Monitoring Technology) | Installed on your organization's Windows server | Real-time dashboard, offline site map, Email/Telegram alerts, PDF reports, Event/Audit Log; supports Room Alert, VUTLAN and HWg via SNMP |
Compare models
| Ports / capabilities | VT225t | VT335G | VT336t | VT825G | VT855G |
|---|---|---|---|---|---|
| Dry Contact input ★ | 2 | 4 | 8 | 16 | 32 |
| Analog port (RJ12) | 4 | 4 | 4 | 8 | 8 |
| Relay 12V 0.25A | 2 | 2 | 2 | 2 | 2 |
| CAN bus devices | 31 | 31 | – | 24 | 24 |
| Dry Contact output | – | – | 5 | – | 8 |
| Relay NC/NO/COM | – | – | – | 2 | 2 |
| Alerts Email | Support | Support | Support | Support | Support |
| Alerts LINE OA | Support | Support | Support | Support | Support |
| Alerts Telegram | Support | Support | Support | Support | Support |
| Alerts SMS | Not supported | Add-on equipment required | Add-on equipment required | Add-on equipment required | Add-on equipment required |
★ Dry Contact input Port for dry-contact (on/off) signals from sensors or other devices such as doors, smoke, water leak and UPS
Models in the group VUTLAN
VT225t
Compact, low-cost model for small IT rooms with few sensors; SMS not supported View specs →
VT335G
Compact model for small rooms or small rack cabinets, Gigabit Ethernet View specs →
VT336t
DIN-rail model for industrial use and control cabinets: 8 Dry Contact inputs and 5 outputs View specs →
VT825G
Mid-range model for Server Rooms with many sensor points, Gigabit Ethernet View specs →
VT855G
Large model for Data Centers, with backup power input and the most Dry Contact inputs in the range View specs →Modules and accessories
| Name | Add ports | Note |
|---|---|---|
VT408 Analog sensor extension unit |
Analog port (RJ12) +8 | Adds 8 Analog ports per unit, connected via CAN bus |
VT440 Dry contacts unit |
Dry Contact input +32 | Adds 32 Dry Contact inputs per unit, connected via CAN bus |
| Dry Contact input +64 | Adds 64 Dry Contact inputs per unit (the VT32 is an add-on board in the VT440) | |
| – | Installs in the unit's Extension slot; supports up to 32 Modbus RTU devices with up to 1,000 m of cable. It uses the same slot as the VT485m ISO and VT485r, so they cannot be used together. | |
| – | Sold separately. Installs in the slot inside the unit and takes a SIM card (not a USB modem). The module model/part number depends on the controller model. | |
| – | Backup battery for models with a battery compartment | |
| – | The ISO Modbus RTU module uses the same Extension slot as the VT485m and cannot be used together with it. This model is not found on the manufacturer's VT335G / VT825G / VT855G product pages. Confirm the spec and compatibility with the manufacturer. | |
VT408D Sensor extension unit (DIN) |
Analog port (RJ12) +8 | The DIN-rail version of the VT408 adds 8 Analog ports per unit |
CAN-12V-1A CAN bus power supply |
– | Recommendedเมื่อมีCAN bus devices เกิน 5 Equipment (ต่อ Adapter เสียบปลั๊กไฟ) |
Compatible sensors and probes
| Equipment | Uses ports | Details |
|---|---|---|
![]() Temperature sensor VT500 |
Analog port (RJ12) ×1 | Plug & play analog temperature sensor |
![]() Outdoor temperature sensor VT515 |
Analog port (RJ12) ×1 | Analog temperature sensor for outdoor installation |
![]() Humidity sensor VT510 |
Analog port (RJ12) ×1 | Analog humidity sensor |
![]() Water leak sensor (for use with WLC cable) VT591 + WLC |
Analog port (RJ12) ×1 | Water leak detection along a WLC cable (sold separately in 10/15/25 m lengths, chainable up to 100 m in total per VT591) |
![]() Spot water leak sensor VT593 |
Analog port (RJ12) ×1 | Spot water leak detection, e.g. under air conditioners or raised floors |
![]() Smoke detector VT560 |
Analog port (RJ12) ×1 | Analog smoke detector, can be daisy-chained in series |
![]() Motion sensor (radar) VT572 |
Analog port (RJ12) ×1 | Radar motion sensor for motion detection |
![]() Vibration sensor VT540 |
Analog port (RJ12) ×1 | Vibration detection |
![]() AC voltage monitor VT520 |
Analog port (RJ12) ×1 | AC voltage monitoring |
![]() Temperature + humidity sensor (CAN) VT490 |
CAN bus devices ×1 | Temperature and humidity sensor on the CAN bus |
![]() Pressure + humidity + temperature sensor (CAN) VT450 |
CAN bus devices ×1 | Measures temperature, humidity, dew point and air pressure |
![]() Smoke + humidity + temperature sensor (CAN) VT460 |
CAN bus devices ×1 | Smoke detection with humidity and temperature measurement |
Dry Contact signals from other devices (UPS, control cabinets, door switches) Dry Contact |
Dry Contact input ×1 | Connects a dry contact from any device. Never apply voltage to the port. |
Control 12V devices (small sirens/signal lights) Relay 12V 0.25A |
Relay 12V 0.25A ×1 | Uses a 12V 0.25A relay. Check the load current of your device before use. |
Control devices via NC/NO/COM contacts Relay NC/NO/COM |
Relay NC/NO/COM ×1 | Switch external equipment on/off via a relay |
Modbus RTU (RS-485) devices Modbus RTU |
– | Collecting data from Modbus RTU devices requires an additional VT485m or VT485m ISO module |
![]() AC voltage monitor (DIN rail) VT520DIN |
Analog port (RJ12) ×1 | DIN-rail AC voltage monitor |
![]() Door sensor (access sensor) VT530 |
Analog port (RJ12) ×1 | Door open/close detection |
![]() Wind speed sensor (anemometer) VT550 |
Analog port (RJ12) ×1 | Measures wind speed |
![]() Dust sensor VT580 |
Analog port (RJ12) ×1 | Dust particle measurement |
![]() DC voltage monitor VT410 |
Analog port (RJ12) ×1 | DC voltage monitoring |
![]() AC current transducer VT405 |
Analog port (RJ12) ×1 | AC current transducer (current converter) |
![]() KMS-30 magnetic door switch KMS-30 |
Dry Contact input ×1 | Contact magnet sensor, dry contact, connects to a Dry Contact port |
![]() KMS-37 magnetic switch (3-wire NC/NO) KMS-37 |
Dry Contact input ×1 | 3-wire NC/NO contact magnet sensor, connects to a Dry Contact port |
![]() WLC water leak cable, 10 m WLC 10M |
– | 10 m water leak cable for VT591, sold separately. Uses no extra port; can be chained up to 100 m in total per VT591. |
![]() WLC water leak cable, 15 m WLC 15M |
– | 15 m water leak cable for VT591, sold separately. Uses no extra port; can be chained up to 100 m in total per VT591. |
![]() WLC water leak cable, 25 m WLC 25M |
– | 25 m water leak cable for VT591, sold separately. Uses no extra port; can be chained up to 100 m in total per VT591. |
![]() Light Tower, 3 colors (red/yellow/green) VT109 |
Relay 12V 0.25A ×1 | 3-color signal tower: green = normal, yellow = warning, red = alarm. 12V DC 70 mA, 2 m cable, IP54. Mounts on a desk, wall or inside a rack. |
![]() Strobe light VT105 |
Relay 12V 0.25A ×1 | Red/white flashing light, 12V DC 120 mA, 2-wire red/black cable 3 m, IP54. Mounts on a wall, ceiling or cabinet. |
![]() Siren with flashing light (Alarm Beacon) VT103 |
Relay 12V 0.25A ×1 | 108 dB siren with red flashing light, 12V DC, 3 m cable, IP54. Wall mount. |
LINE

VT408 Analog sensor extension unit
VT440 Dry contacts unit
VT408D Sensor extension unit (DIN)
CAN-12V-1A CAN bus power supply


























































